Mini Wifi Camera Module HD 720p Micro IP Cam IPC
A 30x30mm board-level WiFi camera module for integrators who need to embed live 720p video into their own enclosure. The 120-degree lens, flat ribbon lens connection and on-board micro USB, TF slot and reset button let you build a compact remote-view camera without designing the imaging section yourself. Loop recording to a TF card and app-based remote monitoring are the practical core of the unit.
Specifications
- Model
- W-1-2
- Angel
- 120
- Resolution
- 1280*720
- FPS
- 15 fps
- WIFI Romote
- Support
- Loop Recording
- Support
- Battery
- No
- Size
- 30*30 mm
- DC
- 5V-1A/2A
Overview
Mini Wifi Camera Module HD 720p Micro IP Cam IPC
The W-1-2 is a bare board camera built to be designed into something else. Instead of a finished housing, you get a 30x30mm PCB with the lens on a short flexible ribbon, so the sensor can sit at an angle or behind a small opening while the board stays where there is room. That split is the point: it lets a compact product carry a forward-facing lens without a bulky body behind it.
What is on the board
- 1280x720 at 15fps over a 120-degree lens, wide enough to cover a doorway or a small room from one corner.
- WiFi remote viewing through a phone app, with live video, playback, photo album and sound detection shown in the app interface.
- Loop recording to a TF card, so the oldest footage is overwritten once the card fills.
- Motion alarm push notification when the scene changes.
- Micro USB port for 5V-1A/2A power, a reset button, a microphone hole and an etched antenna trace on the PCB.
- No battery: the module runs from a wired 5V supply.
Specifications
- Model: W-1-2
- Resolution: 1280x720, 15fps
- Field of view: 120 degrees
- Board size: 30x30mm (dimension drawing marks 31mm including the edge)
- Power: DC 5V-1A/2A
- Storage: TF card slot, loop recording
- Connectivity: WiFi remote monitoring
Where it fits
The module suits indoor and outdoor placements where a small camera has to disappear into the surroundings: a living room shelf, an entrance, an office desk, a yard wall or a garage corner. Because the lens is on a ribbon, it also works in handheld or travel setups where the board is tucked into a case and only the lens is exposed.
Recording duration on a TF card depends on bitrate and card capacity. If your design captures faces, licence plates or sound, confirm that your deployment complies with local privacy and data protection rules.
Applications
1. Retail shelf and counter monitoring: a small board fits behind a display panel for live app viewing. 2. Home entrance and hallway: wide 120-degree view covers a doorway from one corner. 3. Office and coworking desks: discreet remote check-in during travel or off hours. 4. Yard, garage and shed: wired 5V power with loop recording to a TF card. 5. DIY and OEM enclosures: ribbon lens lets builders place optics separately from the PCB. 6. Portable travel kits: board and lens split across a slim case for app-based viewing.